Old Masters 92504 Varnish Spar Marine Semi Gloss Quart
Marine spar varnish exterior - oil-based quart semi-gloss Can be used on wood, fiberglass, coated metal or painted surfaces. Contains Ultra Violet Absorbers for advanced sun protection. Use on exterior surfaces such as fences, railings, lawn furniture, doors, boats and marine surfaces. Can be used on interior wi ndowsills and door frames for added Ultra Violet protection.
Krud Kutter
Gloss-Off Prepaint Surface Preparation is a no rinse formula that's specially designed to prepare high gloss and other hard-to-stick-to surfaces for repainting or refinishing. Specially formulated to help new paint and varnish bond to old finishes, or as a wall preparation prior to wallpapering. It removes dirt, grease, grime, smoke, mildew, food stains, heel marks, crayon, old wallpaper paste, and wax from painted or unpainted wood, metal, or vinyl wallpaper.
Removes:
*check mark Dirt
*check mark Grease
*check mark Grime
*check mark Smoke
*check mark Mildew
*check mark Food Stains
*check mark Heel Marks
*check mark Crayon
*check mark Old Wallpaper Paste
Features:
Cleans and deglosses without sanding
No rinse, one step formula
Use on all paints, varnish, lacquer, and polyurethane
May be coated over anytime after 10 minutes
EPA Safer Choice Certified
Biodegradable
SOLID OIL DECK STAIN GAL DEEP BA
Stains combine maximum color and UV protection with a tough alkyd resin. The results are a completely opaque finish that imparts lasting beauty for deck surfaces. Containing 100% alkyd resin, these solid color stains are extremely durable and are formulated to withstand foot traffic and wear. These stains are excellent for use on most types of exterior wood decking, including pressure-treated pine, red and white cedar, fir, cypress, redwood, and on hardwoods such as mahogany, cambara, merani, and other exotic wood species. Made from special blends of alkyd resins along with all-natural pigments. Apply evenly with a brush, spray, or roller. Best results can be obtained by using a high-quality, natural bristle brush. If you must spray or roll, always backbrush immediately after each section is coated to ensure proper penetration. Dries to a uniform opaque finish. On smooth surfaces, covers approximately 400 Sq. Ft. to 500 Sq. Ft. per gallon, less on rough surfaces. Clean up with mineral spirits.